Skip to content
Example site by DIGIMASON DESIGNS · Pellbrook Home Systems is a fictional home-technology integrator

One demo system, three views. Open two in separate tabs: changes show in both.

Pellbrook Home SystemsAustin, Texas

Audio · theatre · lighting · shades · Wi-Fi · cameras

A house that dims, plays and closes the shades on one keypad.

We design and install home technology for Austin houses, room by room. Plan the rooms below and get an itemised proposal, equipment and labour, before anyone visits. Then hold an install week with a card, or have a designer walk the house with you.

Plan your rooms
Homes finished
612 since 2015
One crew
Pre-wire to programming
Next install week
Oct 5
A modern hill-country house at dusk, its tall windows lit warm from inside
EveningLights 40% · shades down · patio audio on

What we install

Six systems, one app, one number to call.

Every system runs through one control processor and one network, so the “Evening” button can dim the kitchen, drop the west shades and start the patio playlist together.

  • A walnut bookshelf speaker on an oak stand

    Distributed audio

    In-ceiling or in-wall speakers, an amplifier channel and a keypad; any source in any room.

    from $1,180 a room

  • A dark media room with a row of red recliners facing a large screen

    Theatre or media room

    A 5.1 media room around your TV, or a dedicated 7.2.4 theatre with a projector and screen.

    from $7,400 a room

  • A warm table lamp by a window at dusk

    Lighting control

    Keypads with named scenes, dimmers on every load, schedules and away mode.

    from $1,540 a room

  • A grey roller shade drawn partway down a modern window

    Motorised shades

    Quiet wired roller shades that follow the sun and the scenes.

    from $1,240 a window

  • Neatly terminated yellow patch cables in a rack

    Wi-Fi and network

    Ceiling access points on Cat6A, one managed network for the house.

    from $540 a room

  • A security camera mounted high on a white wall

    Cameras

    4K cameras on the drive, doors and pool, recorded at home.

    from $560 a camera

Plan your rooms

Pick the rooms, then what each room does.

The proposal on the right is itemised as you go: our equipment at our prices, Austin sales tax, and labour at $140 an hour. The range covers what a site survey usually finds.

1 The house
2 Rooms and systems
  • Living room
    1 speaker pair
    5 dimmer loads
    3 windows
    1 access point
  • Kitchen and dining
    1 speaker pair
    4 dimmer loads
  • Patio and pool
    1 speaker pair
    2 cameras

Add a room

3 Care after handover

How a project runs

Five visits, one crew, one lead technician.

A typical three-room retrofit takes two working weeks from survey to walkthrough. You see each step in your portal as it happens.

  1. 01

    Site survey

    Measure rooms, walk cable paths, confirm rack and speaker locations.

  2. 02

    Pre-wire

    Cable, backboxes and brackets while walls are open or fished.

  3. 03

    Trim-out

    Speakers, keypads, shades, access points and cameras go in.

  4. 04

    Programming

    Scenes, sources, schedules and the app, set up the way you live.

  5. 05

    Walkthrough

    We teach the household, hand over logins and start your plan.

Care plans

After handover, we keep it working.

Firmware, streaming-service changes and the odd camera that drops off Wi-Fi after a storm. Plans bill monthly on your card and you can change or cancel them in the portal.

An open living room with a long sofa facing a wall of glass and green hills
  • Care

    $39/mo

    Remote monitoring and firmware updates, next-business-day help, one tune-up visit a year.

  • Care Plus

    $89/mo

    Four-hour remote response, two visits a year, a loaner if anything we installed fails.

  • Estate

    $189/mo

    A named technician, quarterly visits, network and camera health checks, same-day on-site.

  • No plan

    $165/hour

    On-site service when you need it, one-hour minimum, next available weekday.

Already a Pellbrook home?

Your portal shows your project, every device by room and your tickets. Report a fault there and it goes straight to the service desk.